You have more than likely heard the term fuse mentioned when referring to any electrical device or circuit. Generally, people know that from time to time a fuse may need replacing and can be one of the reasons why your electrical device may not power on. Knowing what a fuse actually is and what it does is a completely different matter.
In this article, we will start by looking at what a fuse actually is, we will look at the different types of fuses and their applications, and finally, we will answer some key questions associated with fuses.
What is a fuse?
A fuse is a device built for the safety and protection of a circuit. They are internally filled with a conductive strip that melts in the event of an excessive current passing through. If the conductive strip melts within a fuse the circuit will break and prevent any current from flowing through. Fuses reduce the risk of electrocution and fire, they also protect wiring and components and minimise the amount of heat damage that could be caused. A fuse is always fitted in series with the circuit/components that need protection from overcurrent.
When the fuse blows it opens the electrical circuit and stops any current flow through the connected circuit or components. The point at which a fuse will blow its conductive strip is called its breaking capacity.
They have an outer sheath that is used as a safety device to minimise arcing in the event of a severe overcurrent. Overcurrent can be caused within an electrical circuit by short circuits, electrical arcing, and similar electrical issues. If fuses were not fitted the excess current could melt cable insulation and potentially damage other components within the circuit.
Fuses are used in nearly all electrical devices and circuits. They are a cost-effective way of providing electrical protection to electrical systems. Circuit breakers are used in certain applications instead of fuses as when they trip you can simply reset them without replacing them. This is because the internals of a circuit breaker does not get destroyed in the event of an overcurrent.
If you would like to learn more about how fuses work then check out our article here.
What is the electrical symbol for a fuse?
Like any electrical component, fuses are represented by a symbol in electrical drawings. The standard electrical for a fuse is shown below. This may differ depending on what type of fuse is being used.
What is current measured in?
When we talk about fuses we typically rate them by using the terms current and voltage. Current is measured in Amps (A)
What are the different types of fuses?
Fuses, like many electrical components, come in a range of different types, shapes, and sizes. Fuses are either manufactured to be used in AC or DC circuits and should only be used in circuitry they are designed for. Below we will take a look at some of the different types of DC and AC fuses that you may come across. All of the fuses have specific applications where they are used due to their unique individual features.
DC fuses
- Cartridge fuse – a DC cartridge fuse is a low-cost safety device that is used in the protection of electrical circuits, machines, and appliances. They are cylindrical and have a contact point at either end of the fuse. Typically cartridge fuses are made of ceramic, glass, or porcelain materials. They come in a number of different sizes, voltage, and current ratings.
- Automotive fuse – automotive fuses are a type of fuse class that is used to protect the wiring and electrical equipment that is found in vehicles. The majority of fuses in this class are rated for nothing more than about 32 volts but in some cases can rise up to around 42 volts. Another name for automotive fuses is blade fuses and they can come in a variety of different sizes. Blade fuses display their ratings by showing a colour on their body. A colour chart can be found here.
- Resettable fuse – resettable fuses can also be known as poly switch resettable PTCs fuses. They are used in applications where frequent overcurrents may take place such as within computers and various pieces of electrical equipment. The resistance levels within a PTC increase as the temperature does. They allow safe current levels to flow and as soon as they detect an unsafe current level they will stop allowing current to flow through. They ‘reset’ as soon as the temperature returns to the normal, safe level.
- Semiconductor fuse – a semiconductor fuse can also be known as a high-speed fuse or a rectifier fuse. They are fast-acting fuses that limit the flow of current. Typically they have voltage ratings ranging from 130 volts up to around 1,500 volts. You will find semiconductor fuses in applications such as protecting power supplies, diodes, transistors, rectifiers, and many more electrical components.
AC fuses – low voltage fuses
- Cartridge fuse – an AC cartridge fuse is a low-cost safety device that is used in the protection of electrical circuits, machines, and appliances. They are cylindrical and have a contact point at either end of the fuse. Typically cartridge fuses are made of ceramic, glass, or porcelain materials. They come in a number of different sizes, voltage, and current ratings.
- Drop out fuse – a drop out fuse is a rewireable fuse, when a fault occurs it must be rewired. Drop-out fuses contain a spring-loaded arm that will retract when a fault occurs in the system. They protect equipment and electrical systems from current surges and overloads. When an overcurrent occurs it will melt the element within the carrier which disconnects the line or piece of equipment. Drop-out fuses are a cost-effective component that is used on power supply networks and transformers.
- Rewireable fuse – rewireable fuses consist of a carrier that contains a length of fuse wire. the fuse wire is wrapped around the terminals which then allows a path for current to flow by completing the circuit between the pins. Fuse wire is available to buy at different thicknesses and depends on the rating and current that is required. Rewireable fuses are no longer used in industry and if any are found they should be replaced. they were removed from use as they are less reliable than other types of fuses and require human interaction. Rewireable fuses were typically used in the wiring systems of homes and offices.
- Striker fuse – a striker fuse is a fuse that is fitted with a visual indicator that can show if the fuse has blown or which can activate other switchgear within a system.
- Switch fuse – a switch fuse is a type of fuse that can be manually operated by using a handle. They are used to connect or disconnect high current fuses from a system.
AC fuses – high voltage fuses
- Expulsion fuse – expulsion fuses are filled with different types of gas that act when they are heated up. When a fault occurs the gas heats up and decomposes into water vapor. The water vapor blasts the arc causing it to prevent reigniting.
- HRC fuse – an HRC fuse is a high rupturing capacity fuse. If a fault occurs in the circuit the fuse will blow.
Where are fuses used?
Fuses are used in electrical circuits all around us. You will find fuses in most of your electrical devices around the home, in machinery used in industry, automobiles, and practically anything that uses an electrical circuit. Without fuses, these devices would be unsafe and would incur much higher repair bills in the event of a failure.
A good example of where fuses are used is in circuits for electrical motors. The motor protection overload will open when in the event of a short circuit or severe overload.
You can find them in every household appliance in the home that has a plug, such as kettles, hairdryers, televisions, and radios. The size of what fuse is required depends on how much current in amps (A) the piece of equipment requires in normal operation.
Who invented fuses?
Thomas Edison patented a type of fuse in 1890 as part of his electrical distribution system. Since the invention of fuses, they have been developed and changed over the years to be suited for specific applications and circuits, Without fuses, electrical devices and circuits would not be as safe or reliable. The invention of fuses was really a key invention in the world of electronics and electrical circuits.
What are fuses made of?
Fuses are typically made from a combination of materials such as metal alloys. The material used for the fuse will depend on where the fuse will be used and for what purpose. Different fuses will be suited to different materials as they may be exposed to things such as external environmental factors or they may need to have higher electrical tolerances.
The internal element of a fuse is made from a series of alloys such as copper, zinc, silver, or aluminum. The material that is used to make an element needs to stay stable and not oxidize or change its behavior after potentially years in service.
The housing of fuses should be made from a non-combusting material that will not dissipate in the event of overcurrent or short circuits. The material of this is normally a ceramic body rather than glass. Hardened glass fuses are also available to easily display the status of the fuse (whether the internal element has failed or not).
Liam Cope
Hi, I’m Liam, the founder of Engineer Fix. Drawing from my extensive experience in electrical and mechanical engineering, I established this platform to provide students, engineers, and curious individuals with an authoritative online resource that simplifies complex engineering concepts.
Throughout my diverse engineering career, I have undertaken numerous mechanical and electrical projects, honing my skills and gaining valuable insights. In addition to this practical experience, I have completed six years of rigorous training, including an advanced apprenticeship and an HNC in electrical engineering. My background, coupled with my unwavering commitment to continuous learning, positions me as a reliable and knowledgeable source in the engineering field.
